Automations Page
Automations are hands-free, repeating camera moves. Each camera gets hot cue buttons — press one and the move keeps running on its own, so you can add life to a locked-off shot while operating the rest of the show.

The cues
- Presets Sequence — recalls your presets in order, in a loop. Store up to 7 sequences in separate banks and switch between them.
- Camera Shake — adds a handheld-style shake to the shot. You choose which axes shake (pan, tilt, roll, zoom). Camera Shake runs on the gimbal, so it needs an APC-R (or a camera that shares an APC-R's Camera ID).
- Zoom Loop — continuously zooms a motorized-zoom lens in and out.
All cameras and their cues also read at a glance from the Automations overview:

Using the cues
- Press a cue to play it in a loop; press it again to stop.
- Each cue is per camera — camera 1's Zoom Loop is independent from camera 2's.
Tuning a cue
Enter edit mode to reveal each cue's settings:
- Presets Sequence — 7 banks, each holding its own sequence. Per bank you set the Rest Duration (how long each preset is held) and the Transition Speed (how fast it moves between presets), plus the order the presets play. Switch banks to swap the whole sequence on the fly.
- Camera Shake — shake speed and amplitude, and the axes it affects.
- Zoom Loop — a Zoom Speed slider, the launch direction (zoom in or out first), a loop duration of up to 60 seconds, and rest time between loops. A live status tag shows when the loop is running.
note
Automations is a Middle Control Pro feature on macOS. You can start and stop cues manually from the Automations page, or trigger and tune them from Bitfocus Companion.