Configuring APC-R to fixed IP
By default, the APC-R is set to fetch its IP adress automatically from the router DHCP. You can set each ACP-R to a fixed IP address using the Windows / Mac OS Middle Control desktop app. Just connect your APC-R to your laptop via the APC-R micro-usb port using a data cable (not a power cable). Then you can set the camera ID in the setup page.
- Windows
- macOS
Connect your APC-R, then go to the Setup Tab -> Setup button Don't forget to press Press Save when you're done.
You can disconnect / reconnect the APC-R to make sure the settings have been saved successfuly.
You can disconnect / reconnect the APC-R to make sure the settings have been saved successfuly.
Connect your APC-R, then the APC-R will show up on the left sidebar. You can select it to access the network settings. Don't forget to press Press Save when you're done.
You can disconnect / reconnect the APC-R to make sure the settings have been saved successfuly.
You can disconnect / reconnect the APC-R to make sure the settings have been saved successfuly.
warning
The Ethernet and Wi-Fi IP addresses HAVE to be different!